The Shrink Plastic Accessories kit is designed to make it easier than ever to work with Shrink Plastic. The heatproof Silicone Mat protects your work surface when using the Heat Tool and materials such as Shrink Plastic.

The mat is 30cm (11.5in) in diameter, large enough to accommodate even large die-cut shapes. The heatproof Silicone Press Tool has two functions. Use the pointed tip to hold Shrink Plastic die-cuts in place when applying heat, to stop shapes from moving or being blown away by the Heat Tool. Use the pressing tip to flatten curled edges after the die-cut has been shrunk.

The Mesh Screen is designed to be used with the Silicone Mat. Place the 17cm (6.5in) heatproof, silicon-coated screen over a die-cut piece of Shrink Plastic before applying heat. The mesh allows heat to travel through to the Shrink Plastic while holding the die-cut in place. The Mesh Tool is big enough to cover even Bigz Die shapes (up to 6in), so makers can shrink bigger die-cuts. The small raised handle makes it easy to lift the screen, and the coating ensures the screen doesn’t become hot or leave an imprint on the Shrink Plastic shape.

Specification

• Press Tool: 13.5cm x 5cm x 5cm
• Heat Resistant Mat: 30cm x 30cm
• Mesh Screen: 22.23cm x 18.42cm x 2.54cm